Participant Information Aurora Sofa Table with Darrell Peart

1

 

 

 

 

Aurora Sofa Table
Student Tool List & Materials Cut List

  • Steel hammer
  • Measuring tools – squares – tape measure
  • Small plastic headed mallet
  • very small square (3″ or so) or square saddle
  • dental pick ( not necessary, but might be helpful )
  • ¼” -5/16″ – 3/8″ square hollow punches with related ( 3/64″ under hole size) drill bits – helpful to have longer than standard (at least 4″) bit for ¼” punch.
    • Can substitute ¼” 5/16″- 3/8″ chisel from hollow chisel mortiser ( will damage chisel for use in mortiser)
  • Besides bringing a notebook, feel free to bring along a camera to make a visual record of the jigs and setups that you use in class.
  • small chisels
Here is the cutlist – please call with any questions.
Aurora Sofa Table Net Size  
X O # ref Description Material thick wide long
    8   legs mahogany 1  5/8 1  5/8 28  3/4  
    2   front & back skirt mahogany   3/4 3 15/16 37  7/8  
    4   RF,RR,LF,LR skirts mahogany   3/4 5  3/16 6 11/16  
    2   end skirts mahogany   3/4 5  3/16 8  3/4  
    2   faux rails front & back skirt mahogany   1/4 1 13/16 37  7/8  
    4   faux rails RF,RR,LF,LR skirts mahogany   1/4 2  3/16 6 11/16  
    2   faux rails end skirts mahogany   1/4 1  7/8 8  3/4  
    2   middle bottom stretchers mahogany 1  1/16 1  3/8 37  7/8  
    4   outside bottom stretchers mahogany 1  1/16 1  3/8 6 11/16  
    2   end stretchers mahogany 1  1/16 1  3/8 8  3/4  
    1   bottom shelf mahogany 1      8  5/8 54  3/8  
    2   trim/anchor middle mahogany   1/2 2      37  7/8  
    4   trim/anchor outside mahogany   1/2 2      6 11/16  
    2   trim/anchor end mahogany   1/2 2      8  3/4  
    1   top – core mahogany   7/8 13  3/4 55       
    2   bread board end mahogany 1      2  1/2 14       
    1   spline mahogany 1      28         
    1   trim mahogany   7/16   1/8 20       
1   floating tenons any   3/8   9/16 20       
    1   foating tenons any   3/8 2  13/16 8       
    1   foating tenons any   3/8 2 15/16 8       
    1   foating tenons any 3/8″ 4  1/16 10       
    32   ebony plugs 1/4 x1/4 ebony   1/4   1/4   5/16  
    4   ebony plugs ebony   3/8   3/8   5/16  
    2   ebony trim ebony   3/8   3/8 2       
    4   decorative spline ebony   5/16   7/8 5       
mill  oversize      1/8″ – 1/4″ in thickness     -   1/4″ – 1/2″ in width      -    1/2″ – 1″ in length
bring  material but do not cut out
Preffered woods – African mahogany – Hondorus Mahogany – Sappelle